Epoxy & polyaspartic floors · New Hampshire
Garage floors built for salt, studs and mud season.
Diamond-ground prep, full-flake and metallic systems, and a polyaspartic topcoat that shrugs off a New Hampshire winter. Most garages are done in one day.
← Swipe the floor to pour a new finish →
- Free measure & moisture test
- Diamond-ground, never acid-etched
- Park on it in 48 hours
- Written warranty · fully insured
Finishes & pricing
Four systems. Prices posted.
Every floor starts the same way: moisture test, diamond grind, crack repair. Pick what goes on top and see a ballpark right here.
Quick estimate · Full-Flake
How it goes
Most two-car garages: one day on site.
Free measure
We measure, run a moisture test, show real samples in your garage light and leave a written price.
Grind & repair
Dust-shrouded diamond grinders open the slab. Cracks, pits and spalls are filled and ground flush.
Coat & seal
Epoxy base, full flake broadcast, then a clear polyaspartic topcoat that won't yellow or lift under hot tires.
Move back in
Walk on it the next morning, put storage back after 24 hours and park after 48.
FAQ
Asked at every estimate.
Epoxy or polyaspartic, which is better?
Both, in the right place. Epoxy bonds deep into ground concrete and builds thickness, so it is our base coat. Polyaspartic is the clear topcoat: it stays clear in sunlight, flexes with cold and resists hot tires.
How long will it last?
A properly prepped residential flake floor typically lasts 15 to 20 years. Prep is the difference. We diamond grind every floor, while DIY kits only acid etch, and that is why those kits peel.
Can you install in winter?
Yes. Polyaspartic cures at much lower temperatures than standard epoxy. We check slab temperature and dew point first, and a very cold garage may need a heater the day before.
Will it be slippery when wet?
Flake floors have a light texture that grips better than bare concrete. For snowmelt we add an anti-slip additive to the topcoat at no extra charge. Quartz gives the most grip of all.
Do you test for moisture?
Every time. Moisture coming up through the slab is the top cause of coating failure. If readings are high we use a moisture-blocking primer, priced up front.
What do I do before install day?
Clear the floor and park outside. We tape off walls, do the work and clean up.
Free quote
Tell us about your floor.
We reply within one business day to set up your free on-site measure. Prefer to talk? Call or text.
- Call or text
- (978) 836-3294
- hocepoxy@gmail.com
- Hours
- Mon–Fri 7–6 · Sat by appt.
Serving southern and central New Hampshire: Manchester, Nashua, Concord, Bedford, Londonderry, Salem, the Seacoast and the Lakes Region.